AEG / ZANUSSI / ELECTROLUX WASHING MACHINE DISPLAYS ERROR CODE EHO / EHO
Error code EHE/EH0:
EH0 has to do with a defect in the circuit of the safety relay on the control panel. The processor registers and error in the voltage on the circuit board. In other words, the printed circuit board must be replaced and the costs are many hundreds of euros.
But don’t worry. I can repair PCB for you.
What should you do?
Double-check if the machine is realy out of order
Before you signup for repair, first double-check whether your machine realy has a defect. So no more lights or beeps when you switch the machine on – and check whether there is voltage on the outlet.
Signup for repair
If the machine still doesn’t work, then you can signup for repair.
How to dis-assemble the PCB
This Aeg machine is technically the same as an Electrolux or Zanussi dryer.
Remove the top from the machine by unscrewing 2 screws on the back of the top and 1 behind the condensation tray.
The module that I can repair for you is in the rear right.
Take the covers of the printed circuit board and disconnect all plugs.
You do not have to loosen the print any further, just send the entire housing.