AEG / ZANUSSI / ELECTROLUX DRYER DISPLAYS ERROR CODE EHE/EH0
Error code EHE/EH0:
EH0 has to do with a defect in the circuit of the safety relay on the control panel. The processor registers and error in the voltage on the circuit board.
In other words, the PCB must be replaced and the costs are many hundreds of euros. But don’t worry. I can repair PCB for you.
What should you do
Double-check if the machine is realy out of order
Before you signup for repair, first double-check whether your machine realy has a defect. So no more lights or beeps when you switch the machine on – and check whether there is voltage on the outlet.
Signup for repair
If the machine still doesn’t work, then you can signup for repair.
How to dis-assemble the PCB
The PCB that we need is the print on the right side. Nr. 587 in the drawing.
Remove the top from the machine by unscrewing 2 screws on the back of the top and 1 behind the condensation tray.
Unscrew the right side panel, these are the screws on the back.
You will now see the 2 screws that secure the circuit board to the machine.
Take the covers of the printed circuit board and disconnect all plugs.
You don’t have to loosen the print any further, just send the entire housing to us.
This applies to all tumble dryers with the ON / OFF BUTTON under the program switch.
We repair – among others – to the following models:
Zanussi – Aeg – Electrolux